Name: REVIT CONTROL AIR H2O / WATERPROOF RIDING JACKETS: Black / White
Brand: REV'IT
SKU: CONAIRH2BKWT
Price: 27700.00 INR
Availability: InStock

Ventilated textile jacket with detachable waterproof liner

For sport street riders looking for a heavily ventilated jacket (with a waterproofing component) that also want the aesthetic of speed wrapped into a CE-class AA jacket, REVIT bring you the Control Air H2O.

Its own vibe
When REVIT created the Control Air H2O jacket, it had a very distinct vision. It was to be the seamless blending of both motorsport (think hard parts at the shoulders) and sportswear (think lamination around the zippers and tonal graphic prints). And unlike in the past – where any item in a “family” of jackets/pants/one-pieces – echoed almost identical aesthetics, REVIT did something new.

The Control Air H2O jacket is not a direct copy of leather series (jacket and one-piece suit); however, it took the graphics story of the ergonomic gradient shapes built out of diamonds and applied it in its own unique way at the back of the arms. This way, it’s immediately recognizable as a member of the “Control” series, but with its own fashion-focused twist.

Stay cool. Stay dry.
The Control Air H2O is heavily ventilated – think about 2/3 (or slightly more) of the front constructed with PWR|Shell mesh, and about the same ratio around back. That said, it recognize not every day will be as hot as another. For the days when you need some protection against the wind and rain, it included a separately wearable hydratex 2L waterproof membrane.

Fit

Regular fit
The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider’s physique.

Adjustability

Adjustment strap at waist

Adjustment tab at upper arm

Pockets

Two slit pockets on front

Waterproof inner pocket within waterproof liner
The internal pocket within the waterproof liner is waterproof.

Lining

Mesh

Key Features

Jeans loop
The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.

Short connection zipper

Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.

Waterproofing

Detachable hydratex|Lite liner

Ventilation

Fully ventilated mesh

Protection

3D mesh protector pockets

Ready for Avertum Tech-Air® airbag system – ONE SIZE UP
Under this garment you can wear our REV’IT! Avertum Tech-Air® Airbag – or a Tech5 airbag – if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as “”Ready for Avertum Tech-Air® airbag system””, you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation:

1. Measure chest circumference and divide the measurement by two;

2. Measure garment flat on chest line;

3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag.

Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV’IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV – an easy upgrade to maximize safety.

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

TPU protection at shoulder

Outer shell material

High density polyester 600D
This fabric takes polyester yarn and weaves it with a finer polyester yarn, to create a high woven density that increases protection and abrasion-resistance.

Polyester ripstop

PWR|Shell mesh
This PWR|Shell is knitted in an open structure, to allow for breathability and flexibility, which maintains comfort as well as safety.

Visibility

Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Wash and Care:

Outershell